Nortel Meridian Meridian 1 Maintenance Manual page 469

Procedure 24: Restore configuration files and data files from the
backup tape (continued)
Figure 151
Rstdata messages screen 1
Stopping application(s)
02/02/94 16:00:27 Notifying CCR of Shutdown...
02/02/94 16:00:37 Stopping CCR application
Release Communication Resources...
Please wait while tape file list is extracted.
You may be prompted about restoring link control files (Figure 152).
Figure 152
Restore link control files prompt
Link control files are present in this Restore list.
Do you want to restore link control files (y/n)?
7 If you have already configured the links for Release 3C (refer to the
chapter on ÒLink configurationÓ in the Meridian Link/Customer
Controlled Routing Installation and Upgrade Guide
[NTP 555-3202-210]) and you do not want to overwrite them with
backed-up Release 2 configuration, type n and press [Return].
If you have not configured the links for Release 3C, or if you wish to
restore the Release 2 configurations, type y and press [Return].
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 8: Recovery/replacement procedures 457