applexitÑexit software applications
This command applies to CCR only.
This command stops all software applications. Th
operating system up and running. The applications should be shut down
properly to preserve file integrity and save configurations.
Example
maint> applexit
05/14/92 20:34:26 Notifying CCR Application of Shutdown
05/14/92 20:34:32 Stopping CCR application
Releasing Communication Resources...
maint>
applstartÑstart software applications
This command applies to CCR only.
The applstart command starts all software applications loaded on the
Application Module hard disk. It does not restart links. To restart all
applications and links, use the restart command. To start only the CCR
application, use the ccrstart command.
Example
maint> applstart
10/13/93 09:24:18 Starting CCR Application...
Starting Customer Controlled Routing Processes...
maint>
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 2: Application Module commands 21
e c
ommand leaves the