Save Linkctl - Nortel Meridian Meridian 1 Maintenance Manual

save linkctl

If you change the link control information, you can use the save linkctl
command to save the new information in a new file to preserve the original
information in the default link control file for possible later use. The save
linkctl command saves the current link control information to the file
specified. A directory path does not need to be included with the file name,
because link control files are always stored in the usr/mlusr/conf directory.
The command displays current information and asks you to confirm that it
should be saved. If you specify a file name that already exists, you are
prompted to confirm that the file should be overwritten (replaced).
Command format:
mlusr> save linkctl filename
Note: The maximum length of the file name is 14 characters. The file
name should follow a slash character.
Example:
mlusr> save linkctl /hdlchlnk.data
File "/usr/mlusr/conf /hdlchlnk.data" already exists. OK to overwrite?
Confirm? (yes or no): y
mlusr>
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 3: Link maintenance commands 101