Nortel Meridian Meridian 1 Maintenance Manual page 323

1009
Log message
Parameters
1: Call processing software restarted
2: Event Log software restarted
3: CCR system manager software restarted
Description
condition and was restarted by the system watchdog utility.
This event causes a system reset and the impact differs for
Impact
each cause, as follows:
1. System operation will be halted while the system reloads the
call execution machine. Messages reporting that activity should
follow.
2. There is no operational impact on the system.
3. The internal data structures are rebuilt, but there is little
operational impact to the system.
The software recovers automatically. The log file may
Recovery
indicate that certain scripts, variables, and so on could not be installed.
If so, these must be reinstalled manually using the rstdata command.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 7: CCR log file messages 311
The process died due to an unrecoverable error.
Cause 1, 2, or 3, which have the following meanings
The software encountered an unrecoverable internal