Nortel Meridian Meridian 1 Maintenance Manual page 254
Application module and intelligent peripheral equipment module meridian link release 5c/ccr release 3c diagnostic and maintenance guide
Hide thumbs
Also See for Meridian Meridian 1:
- Feature description and administration (1816 pages) ,
- Scripting manual (812 pages) ,
- Upgrade manual (286 pages)
Table of Contents
Advertisement
242 Chapter 5: Application Module and IPE Module error messages
Table 6
Application messages that appear on the console (continued)
Message
tsmsgio: set_up_ipc:
msgget(Q_APPL_KEY,
0666|IPC_CREAT) ÔUNIX error
msgÕ
tsmsgio: send_out_msg:
msgsnd( ) ÔUNIX error msgÕ
tsmsgio: check_q: msgctl( )
ÔUNIX error msgÕ
tssrvtbl: init_serv_tbl( ): shmget
ÔUNIX error msgÕ
Ôdate and timeÕ application Panic:
Link failure - reconfiguring links
553-3211-510 Standard 1.0 October 1998
Description
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates an internal application problem. Use
Procedure 2: SBC restart.
Indicates the X.25 communication software has
crashed and application is being restarted. No action
is necessary.
Ñ end Ñ
- Quick Links:
- Logging in
Hide quick links:
Advertisement
Table of Contents
