Nortel Meridian Meridian 1 Maintenance Manual page 464

Application module and intelligent peripheral equipment module meridian link release 5c/ccr release 3c diagnostic and maintenance guide
Hide thumbs Also See for Meridian Meridian 1:
Table of Contents

Advertisement

452 Chapter 8: Recovery/replacement procedures
553-3211-510 Standard 1.0 October 1998
Procedure 22: Load the application software from tape (continued)
Figure 144
Reboot prompt
Entry for <module name> with address <address> added to tcpip transport
provider database.
Now your system has been modified. You must reboot the system to have the new
kernel take effect.
Would you like to reboot the system now (y/n) ?
25
You are prompted to reboot the system (Figure 144). Type y and
press [Return].
Figure 145
Reboot messages 1
INIT: New run level: 6
The system is coming down.
System services are now being stopped.
Terminating Applications
/usr/bin/maint: /dev/tty: cannot create
cron aborted: SIGTERM
The system is down.
NOTICE: System Reboot Requested (0)
The system clears and the following messages appear.
Note: The following figure is illustrative only. Your messages may be
different depending on the application(s) purchased.
Please wait.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Meridian 1

Table of Contents