114 Chapter 3: Link maintenance commands
save link
553-3211-510 Standard 1.0 October 1998
This command saves the link parameters to the file specified. If no file
name is provided, the file name specified in the link control file is used and
you are asked to confirm that the default file should be overwritten
(replaced). A full directory path must be specified with the file name (for
example /usr/mlusr/conf/mylink).
Command format:
mlusr> save link link_number [filename]
Example:
To save parameters for link number 1 using the default configuration file:
mlusr> save link 1
File "/usr/mlusr/conf/x25hlnk.datafile" already exists. OK to overwrite?
Confirm? (yes or no): y
mlusr>
Example:
To save parameters for link number 1 in a file called savedata:
mlusr> save link 1 /usr/mlusr/conf/savedata
mlusr>