Nortel Meridian Meridian 1 Maintenance Manual page 334

322 Chapter 7: CCR log file messages
553-3211-510 Standard 1.0 October 1998
A script installation into the call processing software
Description
failed to complete. The script is not installed.
The script cannot be used in active call processing until the
Impact
problem has been corrected.
Recovery differs according to the cause, as follows:
Recovery
1: Software errorÑlog out and log back into the system, then retry
the installation.
2: The script installation requires changes in the statistics
information from Meridian 1. When the link is down, these
changes cannot be requested to complete the script installation.
Try again later when the link is up.
3: The script installation requires changes in the statistics
information from Meridian 1. No response to the requests was
received from Meridian 1. Check the status of the link and try
again.
4: This is an attempt to install more than one script at a time. Find
the log file entries for the installation underway and when it
completes, retry the installation.
5: Call processing was unable to install the script, possibly
because of shared memory or other memory allocation problems.
Try again later or restart the application.
6: This script is already installed. Remove the script before trying
to reinstall it.