Bad-Event Messages - Nortel Meridian Meridian 1 Maintenance Manual

286 Chapter 5: Application Module and IPE Module error messages

Bad-event messages

553-3211-510 Standard 1.0 October 1998
The following is an explanation for the Òbad eventÓ messages that you may
see in the Application Module or IPE Module system log file ÒSyslogÓ.
Basically there are three parts to the messages:
<link process name> <bad event> <state>
Example:
mlnkHDLC: bad event:6 - state:5
<link process name>
¥ mlnkHDLC (link to Meridian 1, link 0)
¥ hlnkX25 (link to host if X.25 link, link 1)
can be one of the following:
<bad event>
0 no event
1 message received from other link process
2 (HDLC/LAPB link connect indication, unsolicited)
3 (HDLC/LAPB link confirmation, AM-initiated*)
4 (HDLC/LAPB link disconnect indication, unsolicited)
5 (HDLC/LAPB link disconnect confirmation, AM-initiated*)
6 (HDLC/LAPB link reset indication, unsolicited)
7 (data received on HDLC/LAPB link from Meridian 1 or host)
8 (X.25 link connect indication, unsolicited)
9 (X.25 link connect confirmation: AM-initiated*)
10 (X.25 link disconnect indication, unsolicited)
11 (X.25 link disconnect confirmation, AM-initiated*)
12 (data received on X.25 link from host)
13 (data sent on X.25 link to host Ð confirmation)
14 (X.25 interrupt received on X.25 link from host)
15 (X.25 interrupt sent on X.25 link to host Ð confirmation)
16 (X.25 link reset indication, unsolicited)
17 (X.25 link reset confirmation, AM-initiated*)
* ÒAM-initiatedÓ means the Application Module or IPE Module initiated
the action.
can be one of the following: