Link Status Commands; Status Link; Get Links - Nortel Meridian Meridian 1 Maintenance Manual

Application module and intelligent peripheral equipment module meridian link release 5c/ccr release 3c diagnostic and maintenance guide

Hide thumbs Also See for Meridian Meridian 1:

Table of Contents

94 Chapter 3: Link maintenance commands

Link status commands

553-3211-510 Standard 1.0 October 1998

There are two link status commands: status link and get links.

The status link command shows whether the link is up or down, enabled or

disabled. If a link status changes involuntarily, a Link Up/Down message is

displayed on the system console (if mlusr is logged in) and written to the

SysLog file.

Command format:

mlusr> status link link_number

mlusr> status link 1

This command displays all configured links. If no links are configured,

ÒNONEÓ is displayed.

Command format:

mlusr> get links

Example (CCR):

mlusr> get links

Number of Links: 1

Show Quick Links

Table of Contents