Untrace Link; Untrace Main - Nortel Meridian Meridian 1 Maintenance Manual

142 Chapter 3: Link maintenance commands

untrace link

untrace main

Example: trace main
05/20/92 20:41:37 to MLappl (assoc id=1) Trace Tsmain Response
FF 0A 00 0D 01 80 04 09 03 83 71 03 00
05/20/92 20:41:38 from hlink (assoc id=2) Make Call
FF 0A 00 1D 02 00 02 08 01 1A 30 08 00 00 35 31 30 39 31 08 00 00 35 31 30 38 34
03 01
05/20/92 20:41:38 to mlink (assoc id=2) Outgoing ISDN/AP Msg: CON
FF 0A 00 28 00 00 00 07 01 00 2C 1E 03 1B 00 00 00 02 16 0E 00 02 00 01 01 00 00
00 00 00 00 00 00 00 02 02 9A 15 8A 15
05/20/92 20:41:38 from mlink (assoc id=0) Incoming ISDN/AP Msg: CRS
FF 0A 00 2E 00 00 00 07 02 00 2C 24 03 21 00 00 00 02 16 0F 00 02 00 01 00 0A 00
00 0E 8B 00 00 00 00 02 02 9A 15 8A 15 3D 01 08 3E 01 08
05/20/92 20:41:38 to hlink (assoc id=2) Progress
FF 0A 00 25 02 80 02 08 08 00 30 08 00 08 35 31 30 39 31 08 00 08 35 31 30 38 35
03 01 2E 04 00 0A 3F 04 0E 8B
553-3211-510 Standard 1.0 October 1998
Use untrace link to turn off a trace that was initiated by the trace link
command.
Command format:
mlusr> untrace link link_number
The untrace main to turn off a trace that was initiated by the trace main
command.
Command format:
mlusr> untrace main
Use the view command to see the trace file. (See the view command later
in this chapter for more information on selecting and viewing files.) The
following are examples of trace messages in trace files.