110 Chapter 3: Link maintenance commands
Table 4
Link parameters (continued)
Link parameter
X.25-only
parameters:
Flow control
negotiation
Incoming packet size
Outgoing packet size
Incoming window size
Outgoing window size
Throughput
negotiation used
553-3211-510 Standard 1.0 October 1998
Allowed values
(defaults in parentheses)
(0)Ð1
16, 32, 64, (128), 256,
512, 1024, 2048, 4096
16, 32, 64, (128), 256,
512, 1024, 2048, 4096
1Ð(2)Ð7
1Ð(2)Ð7
(0)Ð1
Ñ continued Ñ
Description
An X.25 service which allows flow
control parameters (packet size and
window size) to be negotiated
between the host and the AM or IPE
Module. Not supported by the AM or
IPE Module. Default value is 0 (no
flow control negotiation).
Use flow control negotiation (packet
size and window size)
0 = no; 1 = yes
Maximum X.25 packet size; must be
identical to the size specified on the
host computer configuration
Maximum X.25 packet size; must be
identical to the size specified on the
host computer configuration
Maximum number of outstanding
incoming packets without an
acknowledgment
Maximum number of outstanding
outgoing packets without an
acknowledgment
Specify whether throughput
negotiation may be used
0 = no; 1 = yes