Ccrmidnightñrun Midnight Routines On System - Nortel Meridian Meridian 1 Maintenance Manual

36 Chapter 2: Application Module commands
ccrmidnightÑrun midnight routines on system
553-3211-510 Standard 1.0 October 1998
This command applies to CCR only.
The ccrmidnight routines run every night to check that the system memory
matches the disk and to put any errors or related information in the CCR
log files. You can run these routines at any time by issuing the ccrmidnight
command.
If the CCR application is running, the following message appears when
executing the ccrmidnight command:
Example:
maint> ccrmidnight
The midnight routine has been executed.
maint>
If the CCR application is not running, the following message appears when
executing the ccrmidnight command:
Example:
maint> ccrmidnight
The midnight routine is not executed
because the CCR application is not running.
maint>