Message Statistics - Nortel Meridian Meridian 1 Maintenance Manual

message statistics

The statistics commands collect and display message statistics (number of
each type of message flowing over the link). There are four statistics
commands. These include
¥ enable message statistics collection
¥ disable message statistics collection
¥ clear messages for statistics
¥ get message statistics
Type help msgtypes and press [Return] to see a list of all message types
that can be selected in the messages parameter. You can also type help
messages and press [Return] to see a list of message types supported by
Meridian Link Release 2 software, up to Release 5C.
Enable message statistics collection
This command starts accumulation of message statistics for the specified
association. Statistics can be collected for either all or selected messages.
Command format:
mlusr> enable msgstat association_id
Example:
To enable message statistics collection for association_id 1:
mlusr> enable msgstat 1
Enable statistics successful
mlusr>
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 3: Link maintenance commands 123