Nortel Meridian Meridian 1 Maintenance Manual page 348

336 Chapter 7: CCR log file messages
553-3211-510 Standard 1.0 October 1998
2027
Fail to delete script from the script list: operation
Log message
aborted
Script Name [Process ID, Action Type, Cause], Error
Parameters
Status, and Procedure where the error occurred
This happens during midnight routines, shutdown, or
Description
script manipulation. The software failed to delete the script entry from
the script list. The entry deletion is aborted.
This should not impact the normal operation of the software.
Impact
There will be an inconsistency in the specified script. The software
thinks that the script is there, but either it does not exist or it has the
wrong file permissions.
If this problem persists, use the ccrmidnight command or
Recovery
restart the system. If the problem occurs more frequently than before,
check file system integrity, using the fileverif command.
2028
Log message
aborted.
Script Name, Error Status, and Procedure where the error
Parameters
occurred
This happens during midnight routines, shutdown, or
Description
script manipulation. The software failed to insert the script entry into
the script list. The entry insertion is aborted.
This should not impact the normal operation of the software.
Impact
There will be an inconsistency in the specified call script. The call
script now exists, but the software thinks that it does not.
If this problem persists, use the ccrmidnight command or
Recovery
restart the system. If the problem occurs more frequently than before,
check the file system integrity, using the fileverif command.
Fail to insert a script into the script list: operation