S5 System • Appendix
Connection cable for external devices
Blood gas analysers:
GEM Premiere
Terumo CDI 500
CDI 100 Monitor
CDI 101 Monitor
Radiometer ABL (ASTM)
Datamaster
Cobe Sat/HCT
Ciba Corning LIS 2
Medtronic BioTrend
Medtronic ACT Plus
Hemochron Response/Junior Signature
Bayer Rapidpoint 400
AVL Omni C
Patient monitors:
Siemens SC 9000 (in addition: connection cable of Siemens)
Hellige VICOM
Datex AS/3
HP Merlin (19.2 kBaud/9.6 kBaud)
Philips IntelliVue MP50, MP60, MP70, MP90
Marquette/ GE Solar 8000
Marquette/ GE Solar 8000 M
Marquette/ GE Solar 9500
Note:
To read out data via the blood gas analysers and patient monitors listed here, at least one
interface module must be connected in the E/P pack. Use the system menu to select and
assign the relevant devices. For more information, refer to the S5 System operating
instructions.
The connection of these devices depends on the current firmware release of the interface
module. The devices listed here are only examples.
7.4
Disposables and accessories
The compatibility of disposables and accessories (as stated in the European Directive 93/42 EEC,
Appendix 9.1/Basic Requirements) with the S5 System must be verified and guaranteed by the
manufacturer concerned. All safety checks and operational checks must be carried out in accordance
with the operating instructions supplied with the equipment concerned.
The compatibility of disposables manufactured by the Sorin Group for extracorporeal circulation with the
S5 System is guaranteed.
7.22
45-12-03
45-12-61
45-12-61
45-12-72
45-12-03
45-12-62
45-12-63
45-12-03
45-12-57
45-12-58
45-12-67
45-12-03
45-12-03
45-12-08
45-12-12
45-12-66
45-12-65
45-12-69
45-12-64
45-12-72
45-12-03
SM-5811-0000.01 ENG
Need help?
Do you have a question about the S5 System and is the answer not in the manual?