Removing The Mast Roller Pump Mrp 150 - SORIN GROUP S5 System Service Instructions Manual

S5 System • Replacing components
6.3.2

Removing the mast roller pump MRP 150

For further disassembly of the MRP 150, proceed as described in section „Removal of roller pump 150" on
page 6.18.
When reassembling (in reverse order) thereafter be extremely careful in positioning the individual
components. Screw the fasteners on the circuit boards in cross pattern and in several iterations in order
to ensure a level seat.
Be careful not to bend the contacts of the plug connector.
6.32
!
SM-5811-0000.01 ENG