Build Warnings - Stratasys F123 Series Manual

Basic Job Build Tasks
• Touching the screen within the center of the Build Status Display while a part is being built
will toggle the information displayed. After touching the screen the time estimation
information will be hidden from view and instead the Build Status Display will show the
number of completed layers as compared to the total number of layers in the build.
Touching the screen again, will toggle back to the time estimation information displayed
initially.

Build Warnings

If the printer detects an issue that may affect a build, it will be indicated within the Notifications
Display portion of the
displayed, depending on the severity of the warning/error, along with text indicating the
reason(s) for the warning. Touching the text on the screen will open a dialog indicating the
reason(s) for the notification, and in some cases, steps to correct the notification (see
Figure 4 (page
Depending on the type of warning, a notification badge icon may also be displayed within the
"Material Status Icons" (page 68)
badge icon on the screen will open the corresponding material's Materials Details page and
provide information indicating the cause of a warning/error.
• When loading and unloading materials you may encounter load related warnings which
need to be resolved prior to starting a build.
• When starting a build you may encounter a variety of warnings pertaining to the printer's
current materials configuration. If the printer has not been calibrated, the materials installed
within the printer do not match the requirements of the build, or the printer does not contain
enough material to complete the build, you will receive a warning instructing you to resolve
this issue.
• In some cases, the warning will prevent you from starting a build and will need to be
corrected before the printer can build a part.
Figure 14: Print Job Status Overview
Build Status
Information
"Build Page" (page
44)).
of the
You can choose to ignore the warning and continue the build, but part build quality
will be unpredictable. A warning generated from a mis-match of model/support
material cannot be bypassed.
© Copyright 2021 Stratasys. All rights reserved.
44). A yellow or red notification badge icon will be
"Materials Page" (page
Build Warnings
Build
Progress
Ring
61). Touching the notification
Page 125