Stratasys F123 Series Manual page 180

Updating Controller Software
5. Within Control Center, select the Services tab. Ensure that your F370 Series printer is
selected from the drop-down menu then click the Update Software button.
6. Control Center will begin establishing a connection with the printer. Once a connection is
established, the workstation PC's file explorer will open.
7. Browse to the location of the .upg software upgrade file.
8. Select the *.upg file to be downloaded and then click Open. Control Center will begin
sending software to the printer. Progress is indicated within the bottom of the Control
Center window as well as on the touchscreen.
Figure 8: Control Center Update Software
Figure 9: Software Download Progress
© Copyright 2021 Stratasys. All rights reserved.
Insight Software Method (F370 only)
Page 169