Build Warnings
If the printer detects an issue that may affect a build, it will be indicated within the
Dashboard. The Build State button will turn yellow or red depending on the severity of the
warning. Pressing the Build State button will open a dialog indicating the reason(s) for the
warning/error. The body of the dialog will contain information related to the cause of the
warning/error. Depending on the type of warning, the canister load status text displayed
beneath each Material Status Icon of the Tips page also provides information indicating the
cause of a warning/error (see
When loading and unloading materials you may encounter load related warnings
•
which need to be resolved prior to starting a build.
When starting a build you may encounter a variety of warnings pertaining to the
•
printer's current materials and tips configuration. If the printer's tips have not been
calibrated, the materials/tips installed within the printer do not match the
requirements of the build, or the printer does not contain enough material to
complete the build, you will receive a warning instructing you to resolve this issue.
Note: You can choose to ignore the warning and continue the build, but part
build quality will be unpredictable. A warning generated from a mis-match of
model/support material or from low/no vacuum cannot be bypassed.
•
In some cases, the warning will prevent you from starting a build and will need to be
corrected before the printer can build a part.
While the printer is building, various pause and abort related warnings may be
•
displayed. Some of these warnings may be due to a manual pause or abort, while
others may be the result of the printer automatically pausing or aborting a build.
Depending on the severity of the warning you may or may not be able to resume
building.
See
"Warnings and Errors" on page 237
encounter, and instructions on how to correct them.
"Canister Load Status" on page
for a detailed list of the warnings you may
167
70).