Temperature Status; Oven Temperature; Head Temperature - Stratasys F123 Series Manual

Printer Status

Temperature Status

Oven Temperature

The oven's temperature can be viewed via the Maintenance page. To locate this information:
1. Press the Tools button within the Navigation Menu; the Tools page will be displayed.
2. Press the Maintenance button within the Tools page; the Maintenance page will be
displayed.
3. Locate the Chamber row within the page. The printer's current and set point oven chamber
temperatures are displayed within this row.

Head Temperature

To view temperature information pertaining to the model and support heads within the
Materials page:
1. Press the Materials button within the Navigation Menu; the Materials page will be
displayed.
2. The Display Area of this page contains two Head Status Icons, one corresponding to the
model head and the other corresponding to the support head. (See
(page 62)
temperature is displayed within the lower portion of the icon.
• A red border with a notification badge in the center of the icon indicates that the
material spool is invalid (i.e. not licensed or not compatible with the associated
head type).
• A red border with a notification badge within the center of the filament pathway
indicates a load related error.
• A semi-solid red icon indicates that an error occurred when checking the data on
the material spool's memory chip and the spool is unusable.
• A solid red icon indicates that communication with the material bay is not possible.
Figure 27: Maintenance Page Oven Chamber Temperature
for details). The head's current temperature as compared to its set point
© Copyright 2021 Stratasys. All rights reserved.
Temperature Status
"Head Status Icons"
Page 138