Viewing Material Details - Stratasys F123 Series Manual

Working with the Materials Page

Viewing Material Details

To view additional details regarding a particular material, select the desired material by
touching its Material Status Icon on the screen. Doing so will open its Material Details page. If
the material bay/spool is in a warning or error state additional information pertaining to the
warning/error will be displayed within the page (see
details).
The right portion of the screen displays detailed information about the material spool including:
• State: load state of the material bay.
• Type: the type of material on the material spool. If applicable, material color is also
indicated (material color is also indicated within the center of the Material Status Icon within
the left portion of the screen).
• Current Volume: current volume of material on the material spool, in cubic inches (also
indicated via the percentage displayed within the Material Status Icon within the left portion
of the screen).
• Total volume: total volume of material available, in cubic inches, when the material spool
was initially installed into the printer.
The buttons directly below this information allow you to load or unload a material spool as
needed or cancel a load/unload in process (see
Please note that the functionality and visibility of these buttons will depend on the load status of
the material spool.
The left portion of the screen displays the same Materials Status Icon as is displayed on the
Materials page (see
indicates which material bay the material spool is installed/inserted into. The colored bars
(displayed within the center of the icon) and percentage (displayed at the bottom the icon)
indicate the current volume and color of the material on the spool. As material is used to build a
part, the number of colored bars and the percentage will decrease to indicate the amount of
material consumed. The name of the type of material on the spool is displayed at the bottom of
the icon.
Figure 25 (page 61)). The number displayed within the top of the icon
© Copyright 2021 Stratasys. All rights reserved.
"Load/Unload Errors" (page 219)
"Material Load Controls" (page 72)
Viewing Material Details
for
for details).
Page 71