Print Job Controls; Print Button - Stratasys F123 Series Manual

Working with the Build Page

Print Job Controls

A button is displayed within the Build page, just beneath the Build Status Display. This button is
used to start, pause, or abort a build, depending on the status of the printer. The Print button
option will become selectable after you've performed the steps necessary to load a file (see
"Loading a File" (page
button will toggle to display the Pause and Abort button options when a build is in process.

Print Button

The Print button allows you to start a build (see
information). The Print button can appear in the following states:
45)) and the printer is in a state where it is ready to build a part. This
Table 2: Print Job Controls - Print Button States
Button State
•
•
•
•
•
© Copyright 2021 Stratasys. All rights reserved.
Figure 13: Print Job Controls
"Selecting a Job to Build" (page 123)
Printer is in a buildable state AND a selected job is available to
build.
Selecting the Print button will begin the build.
Print button is disabled and not selectable.
Printer is not in a buildable state OR a job is not selected/
available to build (i.e. queue is empty).
To troubleshoot this issue, touch the text displayed on the
screen within the Notifications Display. This will open a dialog
allowing you to view the reason(s) for the current build state,
including any issues impeding your ability to start a build (i.e. no
substrate, etc.). See "Warnings at Build Start" (page 215)
"Errors Preventing a Build from Starting" (page 216)
information.
Print Job Controls
Description
for more
and
for more
Page 51