Stratasys F123 Series Manual page 148

Printer Status
3. Touching one of these icons on the screen will open that material's Material Details page
(see
Icons and filament pathways will take on a variety of colors and highlighted states,
depending on their status (see
pertains to both model and support Material Status Icons:
•
•
•
•
•
"Viewing Material Details" (page
Figure 26: Materials Status Locations
Blue border - indicates that a valid material spool is inserted into the corresponding
material bay, the blue filament pathway indicates that material from the spool is loaded
to the head and is selected to be used for building.
Gray (no border) - a solid gray icon indicates that a valid material spool is inserted into
the corresponding material bay, the gray filament pathway indicates that material from
the spool is not loaded to the head.
Gray (dashed border) - an icon that is blank in the center with a gray dashed border
and gray dashed filament pathway indicates an empty material bay.
Yellow - an icon with yellow coloring indicates an issue/warning (see
Errors" (page 214) for more information).
• A volume of 0% accompanied by solid yellow coloring indicates an empty material
spool.
• A yellow border with a notification badge within the filament pathway indicates that
a valid material spool has been inserted into the corresponding material bay, but
the spool's filament has not been detected by the filament present switch.
• A yellow border with a notification badge in the center of the icon and an animated
filament pathway indicates that filament from the corresponding material spool is in
the process of being unloaded from the head.
Red - an icon with red coloring indicates an error (see
(page 214) for more information).
© Copyright 2021 Stratasys. All rights reserved.
71)).
Table 7 (page 69) for detailed status explanations). Coloring
Materials Status
"Warnings and
"Warnings and Errors"
Page 137