Working With The Materials Page - Stratasys F123 Series Manual

Working with the Materials Page

Working with the Materials Page
The Materials page displays a detailed representation of the printer's current materials
configuration. Within this page you can view the printer's current materials configuration
including material types and colors, view material spool volumes and load statuses, load and
unload materials, view current and set point head temperatures, and perform a variety of head
related maintenance functions.
To access the Materials page, press the Materials button within the Navigation Menu; a screen
similar to the one in
Two "Head Status Icons"
icons display load status information as well as the current temperature as compared to the set
point temperature of each of the printer's heads (temperatures are predetermined and based
on material type loaded to the head). The right-most icon pertains to the printer's support head
while the left-most icon pertains to the printer's model head. Touching one of these icons on the
screen will open that head's Head Details page; this page contains additional information
pertaining to the selected head as well as a button for initiating a variety of head maintenance
functions. Icons will be solid gray or solid blue depending on their status.
Depending on your printer's configuration, either two or four
displayed within the lower portion of the Display Area. These icons represent the model and
support materials loaded/installed within the printer. The right-most icon(s) indicate(s) the
status of the printer's support material while the left-most icon(s) indicate(s) the status of the
printer's model material. These icons will take on a variety of colors and highlighted states
depending on their status. Material spools selected for use for building, and whose material is
loaded to the head, are indicated by a blue border. Touching one of these icons on the screen
will open that material's Material Details page; this page contains additional information
pertaining to the selected material as well as buttons for performing a material load or unload.
After selecting any icons or opening a details page a "Back" button will be displayed within the
heading of the page; press this button to return to the main Materials page.
Figure 25 will be displayed.
Figure 25: Materials Page
are displayed within the upper portion of the Display Area. These
© Copyright 2021 Stratasys. All rights reserved.
About the Sample Queue
"Material Status Icons"
Head
Status
Icons
Material
Status
Icons
are
Page 61