Stratasys F123 Series Manual page 112

Working with the Tools Page
the Back button to exit and return to the Network page; the selected connection type will be
indicated within the Connection Type row (see
as a reference).
Depending on the Connection Type selected (Wired or Wireless) the second row displayed
within the Network page will vary.
• If the Wired connection type is selected, the Network Mode row will be displayed.
• If the Wireless connection type is selected, the Available Networks row will be displayed.
The Wireless connection type option will only be displayed if a Wi-Fi dongle has
been installed and the printer's Wifi setting is set to On (see
details). If a dongle has not been installed, or if a dongle has been installed but the
printer's Wifi setting is set to Off, this row will be hidden from view and you will not
have the option of configuring a Wi-Fi network.
Figure 83: Select Connection Type
© Copyright 2021 Stratasys. All rights reserved.
Figure 84 (page 102)
Network
and Figure 85 (page 102)
"Wifi" (page 89) for
Page 101