Stratasys F123 Series Manual page 74

Working with the Materials Page
Warning (head unloaded)
Warning (head loaded)
Error (head unloaded)
Error (head loaded)
Table 6: Head Status Icons - Icon States (Continued)
Icon State
•
•
•
•
•
•
•
© Copyright 2021 Stratasys. All rights reserved.
Yellow coloring and an associated notification badge
indicates a head related warning (see
(page 226)).
Additional information regarding the warning and possible
correction information is displayed by opening the
associated head's Head Details page (see
Details" (page 64)).
When the head's odometer reaches 1350 build hours a
warning will be displayed reminding you to order a
replacement head as the head is approaching is odometer
limit.
Red coloring and an associated notification badge indicates
a head related error (see
Additional information regarding the error and possible
correction information is displayed by opening the
associated head's Head Details page (see
Details" (page 64)).
When the head's odometer reaches 1500 build hours an
error will be displayed. The printer is still able to build with
this head, but you will be reminded before starting each build
that the head's odometer limit has been reached and part
quality may be negatively affected. User action is required to
replace head. See "Head Replacement" (page 119)
instructions.
If the associated head is incompatible with the location
where it is installed (i.e. if the model head is installed in the
support head location), an error will be displayed. After
clicking on the error icon, a message will display with
instructions to replace whichever head (model or support)
was incorrectly installed.
Head Status Icons
Description
"Head Warnings"
"Viewing Head
"Head Errors" (page
"Viewing Head
226)).
for
Page 63