Stratasys F123 Series Manual page 78

Working with the Materials Page Viewing Head Details
After pressing the Unload Head button, the Select Spool screen displays.
Figure 28: Select Spool
The Select Spool screen is used to confirm which spool is currently loaded and will be
unloaded by pressing the Unload Head button. Touch the radio button for the currently-loaded
spool and then touch the Accept button to confirm.
Heat/Cool
Depending on the state of the printer, either the Heat or Cool button will be displayed. Pressing
the Heat button instructs the printer to heat the corresponding tip to 270°C for no longer than 2
minutes; the button will toggle to display the Cool button. Pressing the Cool button will instruct
Page 67
© Copyright 2021 Stratasys. All rights reserved.