First Layer Material - Stratasys F123 Series Manual

Working with the Tools Page
You can select the part's build location by dragging and dropping the bounding box on the
touchscreen; the bounding box cannot be placed outside the limits of the platen. Pressing the
Print button will confirm your selected placement and start a build. "Ghost box" graphics are
also displayed; a "ghost box" represents the location where a part was built previously. Clicking
the Clear History button will clear the display, removing all "ghost box" items.

First Layer Material

The First Layer Material row displays the material type to be used for the first build layer, Model
or Default.
Figure 44: Part Placement Dialog
Figure 45: First Layer Material
© Copyright 2021 Stratasys. All rights reserved.
Settings
Page 85