Stratasys F123 Series Manual page 156

Printer Status
9. Connect a computer to the printer at the ethernet ports using a crossover cable.
10. Navigate to the computer's Ethernet Network Settings and select "Change Adapter
Options".
11. Right click on Ethernet and select Properties.
12. In the Ethernet Properties screen, using the images below as a general guide, set the "IP
address" to match the printer's, EXCEPT change the last triplet to another number
between 1 and 255.
13. Set the "Subnet mask" to match the printer and click OK.
Figure 38: Locate Ethernet Settings
© Copyright 2021 Stratasys. All rights reserved.
MTConnect System Activation
Page 145