Stratasys F123 Series Manual page 124

Loading Material
•
Filament
Opening
8. Once filament is detected by the filament present switch press the Load button within the
Material Details page.
9. Press the Back button within the Material Details page to exit and return to the Materials
page.
The Material Status Icon will refresh and display in its solid gray unloaded state (see
Table 7 (page 69)).
Only one material can be loaded at a time.
© Copyright 2021 Stratasys. All rights reserved.
Figure 7: Insert Material Spool
Figure 8: Load Button
Material Spool Installation
Material
Spool
Page 113