Viewing Head Details - Stratasys F123 Series Manual

Working with the Materials Page

Viewing Head Details

To view additional details regarding the printer's model or support head, select the desired
head by touching its Head Status Icon on the screen. Doing so will open its Head Details page.
If the head is in a warning or error state additional information pertaining to the warning/error
will be displayed within the page (see
(page 226)
The right portion of the screen displays status information pertaining to the selected head:
• State: displays the load status of the corresponding head.
• Last Material: displays the type of material last loaded to the head.
• Date Loaded: displays the date that material was last loaded to the head.
• Odometer: displays the amount of build time for the selected head. This value is important
as the printer will display different errors depending on the amount of build time for a head.
•
•
• Serial Number: displays the head's unique serial number.
• Manufacturing Date: displays the date that the head was manufactured.
The left portion of the screen displays the same Head Status Icon as is displayed on the
Materials page (see
compared to the set point temperature of the head. The Maintenance button directly below the
Head Status Icon will display a menu allowing you to perform a variety of head maintenance
functions.
for details).
When a head's odometer reaches 1350 build hours (700 hours for the TPU 92A head,
600 hours for the ABS-CF10 head) the Head Status Icon will be displayed in its warning
state, and you will be prompted to order a replacement head.
When a head's odometer reaches the 1500 build hours odometer limit (800 hours for
the TPU 92A head, 700 hours for the ABS-CF10 head), the Head Status Icon will be
displayed in its error state, and you will be prompted to replace the head. You can
continue to build using the head, but part quality will be unpredictable. It is
recommended that you immediately change a head which has exceeded its odometer
limit (see "Head Replacement" (page 119)
Figure 25 (page
© Copyright 2021 Stratasys. All rights reserved.
"Head Warnings" (page 226)
for instructions).
61)). This icon displays the current temperature as
Viewing Head Details
and "Head Errors"
Page 64