Material Load Controls - Stratasys F123 Series Manual

Working with the Materials Page
To close this page and return to the main Materials page, press the Back button within the
header of the page.

Material Load Controls

The Material Load Control buttons are used to load and unload material to the liquefier within
the head, as well as cancel a material load or unload in process. The Material Load Control
buttons are displayed in the lower-right portion of the Material Details page; however, the
visibility of these buttons is dependent upon the spool's load status. Button states are
explained within the tables below.
Figure 30: View Material Details
Figure 31: Material Load and Maintenance Buttons
© Copyright 2021 Stratasys. All rights reserved.
Material Load Controls
Warning/error
information
displayed here
Page 72