Standby Mode; Language - Stratasys F123 Series Manual

Working with the Tools Page

Standby Mode

The Standby Mode setting gives you the ability to put the printer into an energy saving state
after the completion of a build. When the Energy Saver radio button is selected (i.e. Standby
Mode is turned On) the printer's oven will automatically shut off 2 hours after the completion of
a build, thus saving energy. When the Quick Start radio button is selected (i.e. Standby Mode is
turned Off) the printer's oven will remain On for 60 hours after the completion of a build and
oven temperature will stay at the material's build temperature.
To configure this setting, press anywhere within the row; the Standby Mode page will be
displayed. Use the radio buttons within the page to select between the Energy Saver and
Quick Start options as needed. The Quick Start radio button is selected by default (i.e. Standby
Mode is set to Off by default).

Language

The Language row displays the language that the User Interface is configured for. Language
options include English (default), Spanish, French, German, Italian, Russian, Chinese
(traditional or simplified), and Japanese.
To configure this setting, press anywhere within the row; the Language page will be displayed.
Use the scrollbar (along the right side of the page) to view the list of available languages.
Select the radio button corresponding to your desired language.
Figure 49: Standby Mode
Figure 50: Configure Standby Mode
Figure 51: Language
© Copyright 2021 Stratasys. All rights reserved.
Settings
Page 87