Stratasys F123 Series Manual page 81

Working with the Materials Page
Unloaded (gray border)
Loaded (blue border)
Empty Spool (solid yellow)
Error (solid red)
Table 7: Material Status Icons - Icon States (Continued)
Icon State
© Copyright 2021 Stratasys. All rights reserved.
• Valid material spool loaded into bay. Material name,
color, and current volume displayed.
• Filament from material spool has been advanced and is
in contact with the filament present switch but material
from spool is not loaded to the head. See
Material" (page 110)
• Valid material spool loaded into by. Material name, color,
and current volume displayed.
• Material from spool is loaded to the head and spool is
selected to be used for building.
• See "Selecting a Job to Build" (page 123)
on starting a build. See
for instructions on unloading material.
• Material spool is empty - a volume of 0% is displayed.
• User action required to remove empty spool. See
"Unloading Material" (page 114)
Empty Material Spool" (page 116)
• Indicates that communication with the material bay is not
possible. Please note that this state differs from the
unusable state as the icon is solid red in this state and the
bars within the center of the icon are not visible.
• Contact Customer Support or your regional Stratasys
office if you experience this icon state (see
(page 214) for contact information).
Material Status Icons
Description
for instructions.
for instructions
"Unloading Material" (page 114)
and "Removing an
for instructions.
"Loading
"Getting Help"
Page 70