Operating The Printer; Basic User Operations; Powering On The Printer - Stratasys F123 Series Manual

Basic User Operations

5 OPERATING THE PRINTER

5
This chapter explains basic steps in operating the F123 Series
Basic User Operations

Powering ON the Printer

To power the printer ON:
1. Connect the male end of the supplied power cord directly into a grounded electrical outlet.
2. Connect the female end of the power cord directly into the socket located on the back of
the printer (see
3. Press the power button located on the front of the printer.
4. The printer will begin to boot. The touchscreen will turn on and begin initializing.
5. The first time the printer is powered ON a dialog will be displayed asking you to select your
desired language. Select the radio button corresponding to your desired language by
touching its row on the screen, then confirm your selection.
Figure 7 (page 14) for location).
Figure 1: Power Button Location
Power Button
Figure 2: Initializing Start Up Screen
© Copyright 2021 Stratasys. All rights reserved.
Powering ON the Printer
Page 108