Stratasys F123 Series Manual page 126

Unloading Material
3. Observe the status information displayed for each of the Materials Status Icons. For a
loaded material, the pathway between the material's Material Status Icon and
corresponding Head Status Icon will be solid blue, the Head Status Icon will be blue, and
the Material Status Icon will display a solid blue border.
4. Open the Material Details page corresponding to the material bay you want to unload by
touching its Material Status Icon on the screen.
5. Press the Unload button within the Material Details page.
6. Material begins to unload from the head. The unload process will take several minutes;
please be patient.
•
•
•
Figure 9: Current Configuration - Unload Material
Only one material can be unloaded at a time.
The pathway displayed between the Material Status Icon and the corresponding Head
Status Icon becomes highlighted to indicate unload progress (see
Figure 33 (page 76)).
The Head Status Icon will refresh and become solid gray, indicating that material is no
longer loaded to the head.
The Material Status Icon will refresh and display a solid yellow border with a notification
badge over the center of the icon. The icon will remain in this state until the material
spool is reloaded or completely removed.
© Copyright 2021 Stratasys. All rights reserved.
Figure 10: Unload Button
Material Spool Installation
Page 115