Potential Safety Hazard Areas; Oven - Stratasys F123 Series Manual

Safety Instructions

Potential Safety Hazard Areas

The following components and areas of the printer are highlighted as potential safety hazards
that may cause system failure or reliability problems if proper safety procedures are not
followed.

Oven

Figure 3: Electrical panel safety label locations
Warning: Hot Surfaces.
Always wear safety gloves and long sleeves when working inside the oven.
Components are hot.
Opening the oven door shuts the oven heaters off.
© Copyright 2021 Stratasys. All rights reserved.
Potential Safety Hazard Areas
Page 4