Stratasys F123 Series Manual page 178

Updating Controller Software
6. Select USB.
7. Navigate to and select the upgrade file from its saved location on the USB drive.
8. The upgrade file will install. The screen will display the status until the upgrade is complete.
Figure 5: Upgrade File Location
Figure 6: Upgrade Status
Updating Controller Software will erase all job files from the Job Queue (files
within the Internal Storage will be retained). After completing the software
upgrade, you will need to resend jobs to the printer.
© Copyright 2021 Stratasys. All rights reserved.
Figure 4: Load File
USB Flash Drive Method
Page 167