Tools Page Menu - Stratasys F123 Series Manual

Working with the Tools Page
To access the Tools page, press the Tools button within the Navigation Menu; a screen similar
to the one in

Tools Page Menu

The Display Area of the Tools page contains 6 buttons. With the exception of the Light button,
pressing each of these buttons will open an individual page containing printer information that
can be viewed as well as printer settings and preferences which can be configured.
Icon State
Settings
Calibration
Maintenance
Network
Figure 36 will be displayed.
Table 12: Filament Pathway States
Pressing the Settings button opens the Settings page. From this page you can
configure and adjust several of the printer's default settings. See
(page 82) for details.
Pressing the Calibration button opens the Calibration page. From this page you
can preform various printer calibration procedures. See
for details.
Pressing the Maintenance button opens the Maintenance page. From this
page you can perform various printer maintenance procedures. See
"Maintenance" (page 96)
Pressing the Network button opens the Network page. From this page you can
configure the printer's network connection. See
details.
© Copyright 2021 Stratasys. All rights reserved.
Figure 36: Tools Page
Description
for details.
Tools Page Menu
"Settings"
"Calibration" (page 93)
"Network" (page 100) for
Page 79