Maintenance; Gantry/Stage - Stratasys F123 Series Manual

Working with the Tools Page

Maintenance

From this page you can perform a variety of maintenance procedures on the printer, and view
diagnostic/printer state information. Please note that advanced maintenance must be
performed by an authorized service representative only.
To access the Maintenance page, press the Maintenance button within the Tools page; a
screen similar to the following will be displayed.

Gantry/Stage

Position information for the X, Y and Z axes is displayed within the Gantry/Stage row. Pressing
anywhere within the Gantry/Stage row will open the Gantry/Stage page.
This section provides an overview of the Maintenance page and its features, but
does not go into detail regarding printer maintenance procedures. See
Maintenance (page 165)
© Copyright 2021 Stratasys. All rights reserved.
for detailed maintenance information.
Figure 71: Maintenance Page
Figure 72: X, Y, Z Position
Maintenance
Chapter , 7
Page 96