Stratasys F123 Series Manual page 58

Working with the Build Page
5. Within the Job Details page press the Add to Queue button; this will load the job into the
Job Queue.
6. After pressing the Add to Queue button you will be returned to the Build page. The Load
File button will no longer be visible. Instead, the details of the selected job file will be
displayed within the Print Job Information Panel.
7. Pressing the Print button within the Build page will initiate the build. Build progress will be
displayed within the Build Status Display, see
Figure 7: Add File to Queue
Figure 8: Build Page with Job Information
© Copyright 2021 Stratasys. All rights reserved.
"Build Status Display" (page 49)
Loading a File
for details.
Page 47