Stratasys F123 Series Manual page 80

Working with the Materials Page
Material Status Icons, depending on the state of the material bay. The Material Status Icons
can appear in the following states (color usage, highlighting, and descriptions apply to all
icons):
Empty Bay (gray dashed border)
Unusable (semi-solid red)
Invalid (red border)
Table 7: Material Status Icons - Icon States
Icon State
© Copyright 2021 Stratasys. All rights reserved.
• Indicates that a material spool is not loaded in the
corresponding material bay, the material bay is empty.
• User action required to insert spool. See
Material" (page 110)
(page 111) for instructions.
• Touching the icon in this state will not display the
material's Material Details page.
• Indicates that an error occurred when checking the data
on the material spool's memory chip. The material spool
is unusable.
• User action required to remove the material spool and
replace it with a valid spool. See
Spools" (page 116)
(page 111) for instructions.
• Touching the icon in this state will not display the
material's Material Details page.
• Indicates that the material spool is invalid. Invalid
materials are materials not licensed or not compatible
with the associated head type.
• Material from the invalid spool cannot be loaded. User
action required to remove the invalid material spool and
replace it with a valid spool See
Spools" (page 116)
(page 111) for instructions.
Material Status Icons
Description
"Loading
and "Material Spool Installation"
"Removing Material
and "Material Spool Installation"
"Removing Material
and "Material Spool Installation"
Page 69