Build
5.
Using the touchscreen, position the part on the displayed platen.
6.
Press the Build icon to initiate the building of the selected part.
BUILD JOB WARNINGS
If the system detects an issue that may affect a job build, the system displays one of the following warnings:
A.
Head has been changed. Consider tip calibration.
•
Indicates a new head has been installed.
•
Run and verify a calibration part before building jobs.
B.
Change Model (or Support) canister to ABS (or other material).
•
Indicates a mis-match between loaded material and material for which the part (CMB) file was
processed.
•
Replace the flagged material canister with proper type.
39
Position Part