Product Safety Signs - Stratasys F123 Series Manual

Safety Instructions
• Warnings and Cautions precede the paragraph to which they pertain.
• Notes follow the relative paragraph.

Product Safety Signs

Stratasys makes every effort to ensure that our printers are safe and reliable at all times.
However, there will be times when you must access areas of the printer where potentially high
voltages, hot temperatures, and/or moving mechanical components could cause severe injury.
Warning Symbols
Warning:
Indicates a potentially hazardous situation which, if not avoided, may result in injury
or death.
Caution:
Indicates a situation which, if not avoided, could result in damage to equipment.
Indicates additional information relative to the current topic.
Always read and adhere to safety statements, and be aware of the following safety
signs when you see them on the printer.
Meaning
Hot surface
High voltage
Gloves
Moving parts
© Copyright 2021 Stratasys. All rights reserved.
Location
Oven entrance
Electrical panel, near the
power-supply enclosures
Oven entrance
Oven entrance
Product Safety Signs
Comments
Risk of burns. Do not touch
this surface after printing.
Risk of electric shock.
Safety gloves approved for
high temperatures must be
worn in locations where
this symbol is displayed.
Risk of injury from moving
parts.
Page 2