Stratasys F123 Series Manual page 88

Working with the Materials Page Material Load Controls
Material unload progress will display the same functionality regardless of whether a model or
support spool is being unloaded. As material is being unloaded from the head, the pathway
between the Head Status Icon and Material Status Icon will be highlighted in yellow and the
Head Status Icon will turn solid gray indicating that material is no longer loaded to the head. A
yellow notification badge will be displayed within the center of the Material Status Icon to
indicate that user action is required to complete the unload process.
Opening the Material Details page for the material being unloaded will provide additional
details regarding the unload process. The Load button will be displayed within the Material
Details page once the spool's filament has been completely retracted indicating that the spool
can be reloaded, if needed.
Once material is fully unloaded, filament pathway and Material Status Icon coloring will remain
in their unloading states until the corresponding material spool is removed from the material
bay. Once the spool is removed, the filament pathway and Material Status Icon will refresh and
display in their empty states.
Figure 34: Material Load Progress - Unloading
Page 77
© Copyright 2021 Stratasys. All rights reserved.