Stratasys F123 Series Manual page 2

User Guide
Copyright Statement
Copyright © 2021 Stratasys Ltd. All rights reserved.
No part of this document may be photocopied, reproduced, or translated into any human or
computer language in any form, nor stored in a database or retrieval system, without prior
permission in writing from Stratasys. This document may be printed for internal use only. All
copies, shall contain a full copy of this copyright notice.
Trademarks Acknowledgments
Stratasys, F123 Series, F170, F270, F370, GrabCAD, GrabCAD Print, Insight, and FDM are
trademarks of Stratasys and/or subsidiaries or affiliates and may be registered in certain
jurisdictions. All other product names and trademarks are the property of their respective
owners.
Liability Statement
Stratasys shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material. Stratasys
makes no warranty of any kind with regard to this material, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose. It is the responsibility
of the system owner/material buyer to determine that Stratasys material is safe, lawful, and
technically suitable for the intended application as well as identify the proper disposal (or
recycling) method consistent with local environmental regulations. Except as provided in
Stratasys' standard conditions of sale, Stratasys shall not be responsible for any loss resulting
from any use of its products described herein.
Disclaimer
Customer acknowledges the contents of this document and that Stratasys parts, materials, and
supplies are subject to its standard terms and conditions, available on
http://www.stratasys.com/legal/terms-and-conditions-of-sale, which are incorporated herein by
reference.
The specifications and/or information on which this document is based are subject to change
without notice.
www.stratasys.com
Comments: c-support@stratasys.com
© Copyright 2021 Stratasys. All rights reserved.
Page ii