Stratasys F123 Series Manual page 114

Working with the Tools Page Network
network, entering the password and/or username required to connect to the network (if
applicable), and saving the network configuration, press the Back button to exit and return to
the Network page; the name of the selected wireless network will be indicated within the
Available Networks row.
Figure 87: Select Wireless Network Mode
Dynamic Network Configuration
When the Dynamic (DHCP) wired network option is enabled a network server or PC will
generate an IP address for the printer. A different IP address may be generated from time to
time by the server or PC. The generated IP address will be displayed within the IP Address
field, and corresponding Subnet Mask, Gateway Address, and MAC Address information will
also be displayed.
When finished, press the Back button to exit and return to the Tools page.
Figure 88: Dynamic Network Configuration
Page 103
© Copyright 2021 Stratasys. All rights reserved.