Stratasys F123 Series Manual page 20

General Information
1
# Item
From repeated use, the touchscreen may become dirty and occasionally need to be
Touchscreen
1 cleaned. Only use suitable LCD cleaning agents when cleaning the touchscreen. See
Cleaning Kit
"Cleaning the Touchscreen Display" (page 179)
Various components of the printer may become dirty and occasionally need to be cleaned.
Microfiber
2 Only use a suitable microfiber cloth to clean these components. See
Cloth
Surface of the Printer" (page 179)
When unloaded, non-empty model and support material spools should be stored within
Resealable
3 these bags to prevent moisture from contacting the spool's filament (see
Bag (x3)
Materials" (page
Figure 3: Welcome Kit Contents - Cleaning Supplies & Storage Materials
Table 3: Key for Figure 2-4
118)).
© Copyright 2021 Stratasys. All rights reserved.
Description
for cleaning instructions.
for cleaning instructions using this cloth.
Welcome Kit Contents
2
3
"Cleaning the Exterior
"Handling/Storing
Page 9