Stratasys F123 Series Manual page 113

Working with the Tools Page
See the detailed information in the sections below for specific information on the available
connection types.
If the Wired connection type is selected, the Network Mode row will be displayed (see
Figure 84 (page 102)
select between a Static or Dynamic network mode; Dynamic is selected by default. Use the
Static and Dynamic radio buttons to select a network mode. After selecting a network mode
press the Back button to exit and return to the Network page; the selected network mode will
be indicated within the Connection Type row.
If the Wireless connection type is selected, the Available Networks row will be displayed (see
Figure 85 (page 102)
allowing you to scan for and connect to an available Wi-Fi network. After selecting an available
Figure 84: Network Page - Network Mode Row
Figure 85: Network Page - Available Networks Row
as a reference). Pressing anywhere within this row will allow you to
Figure 86: Select Wired Network Mode
as a reference). Pressing anywhere within this row will open a page
© Copyright 2021 Stratasys. All rights reserved.
Network
Page 102